KPSC

EXTRA ORDINARY GAZETTE DATE 17/07/2006 LAST DATE 17/01/2007
CATEGORY No. 151/06
1.		Department			:	Industrial and Commerce
2.		Name of Post			:	Assistant Director (Tool Room)
3.		Scale of Pay			:	Rs.7450-11475
4.		No. of vacancies			:	1 (One)
		The above vacancy is now in existence. The list of selected candidates published by the Commission in response to this notification shall remain in force for a minimum period of one year provided that the said list will continue to be in force till the publication of a new list after the expiry of the minimum period of one year or till the expiry of three years whichever is earlier. Candidates will be advised from the said list against the vacancies noted above and that may be reported to the Commission in writing during the period of currency of the list.
5.		Method of appointment	:	Direct Recruitment
6.	Age Limit		:	Must have completed 18(Eighteen) years and must not have completed 35(Thirty Five) years as on 01.01.2006 with usual relaxation to SC/ST and OBC candidates. (for conditions regarding the age relaxation please see part (2) of the General Conditions).

7.	Qualifications		:	1. 2.	A Degree of recognized University in Mechanical Engineering or Metellurgy. Experience of not less than two years in a Tool Room manufacturing dies, Jigs and fixtures in a Government owned Company or Corporation or an Industrial Establishment registered under the Indian Companies Act.
Training :		A person appointed to any class or category by direct recruitment under these rules shall undergo such training for such period as may be fixed by Government at the time of appointment. He shall be paid Travelling Allowance also as per rules. The period spent on training shall be considered as duty and shall be counted for increment, experience and probation.
		Provided that the candidates selected from Government Service shall be allowed to draw the pay and allowance they would have drawn but for their appointment under these rules, if the pay and allowances drawn by them are higher than the minimum of the scale of pay and usual allowances of the post to which they have been appointed candidates should produce experience certificate in the format appended below as and when required by the Commission.

CERTIFICATE OF EXPERIENCE

(Name of Government owned Company/Corporation/Industrial Establishment registered under the Indian Companies Act.)

(Register Number with date of registration)

Issued to (here enter name and Address)

……………………………………………….

………………………………………………..

……………………………………………….

This is to certify that the above mentioned person has worked/has been working/is working in this institution as…………………………………………..(here enter the name of post holding or held or the nature of assignment) on Rs…………………………………..per day/per a period of ………………years…………..months……………….days from ………..to ……….. . He has got experience of not less than two years in a Tool Room manufacturing dies, jigs and fixtures. Also certified that the institution is registered under the Indian Companies Act.

Dated signature, Name and Designation of the

ssuing Authority with Name of the Institution

Place

Date of issue

(Seal of Office)

Declaration

Certified that Sri……………………………………………….mentioned in the above experience certificate has actually worked/is working as…………………………..(specify nature of employment ) in the above Institution during the period mentioned therein as per the entry in the register (Name of register to be specified)maintained by the employer as per the provision of the……………… Act (Name of the Act/Rules to be specified). Also certified that I am the authorized Officer to inspect the Register kept by the employer as per the provisions of the………….. Act/Rules of the State/Central Government.

Signature with Date

Name of attesting Officer with

Designation and Name of Office.

(Office Seal)

Note: The veracity of the experience certificate will be subjected to scrutiny and those who issue or produce bogus certificate will be subjected to legal proceedings.

8. Application form:-

Application Form and Application Fee:

The application form is a single sheet of paper printed on both sides to facilitate Computer processing also using the Optical Mark Reader (OMR). Side ‘A’ is the OMR data sheet and Side ‘B’ is the conventional application form. The Candidates must darken the bubbles in Side A and fill up columns in Side B of the application form.

The cost of application is Rs.10/- (Rupees Ten only). The cost of application for Scheduled Caste and Scheduled Tribe candidate is Rs.5/- (Rupees Five only). An inforamation brochure will be supplied along with the application form. Candidates should read the instructions carefully before filling up the forms. Candidates should not enclose any documents along with the application. Copies of documents to prove educational The application form can be obtained from the various Offices of the Kerala Public Service Commission and from the various Post Offices in Kerala .

qualification, experience, community age etc should be submitted as and when called for by the Commission.

	9	The applicant shall send his application in the cover supplied with the application form. Applications should be submitted in the form devised and printed by the Kerala Public Service Commission, and applications otherwise submitted will be summarily rejected.
	10.	Mode of sending the applications:-
		(a)	The name of the post, the Category Number and the Department of the respective post should be clearly noted at the top of the envelope.
		(b)	The name and address of the candidates shall be entered at the bottom left hand corner and the address to which applications are to be sent at the bottom right hand corner of the envelope.
11.		Last date for receipt of applications		:	17.01.2007 Wednesday upto 5.00 p.m
12.		Address to which applications are to be sent		:	The Under Secretary-IVGovernment Wing (Recruitment)Office of the Kerala Public Service CommissionPattom, Thiruvananthapuram-695 004.
		(Please also see the General Conditions given in Part II)

EXTRA ORDINARY GAZETTE DATE 17/07/2006 LAST DATE 17/01/2007
CATEGORY No. 152/06
1.		Department			:	Industrial and Commerce
2.		Name of Post			:	Assistant Director (Plastics) Common Facility Service Centre.
3.		Scale of Pay			:	Rs.7450-11475
4.		No. of vacancies			:	1 (One)
		The above vacancy is now in existence. The list of selected candidates published by the Commission in response to this notification shall remain in force for a minimum period of one year provided that the said list will continue to be in force till the publication of a new list after the expiry of the minimum period of one year or till the expiry of three years whichever is earlier. Candidates will be advised from the said list against the vacancies noted above and that may be reported to the Commission in writing during the period of currency of the list.
5.		Method of appointment	:	Direct Recruitment
6.	Age Limit		:	Must have completed 18(Eighteen) years and must not have completed 35(Thirty Five) years as on 01.01.2006 with usual relaxation to SC/ST and OBC candidates. (for conditions regarding the age relaxation please see part (2) of the General Conditions).

Qualifications: 1

A Degree or Diploma or Associate Membership awarded by a recognized Indian or ForeignUniversity or Institution approved by Government, in Plastic Technology relating to Plastic processing such as compounding vulcanizing and testing of various properties of Plastics.

B.Tech Degree in Polymer Science and Rubber Technology of Cochin University of Science and Technology.

Experience of not less than two years in plastic manufacturing in a Government owned Company or Corporation or an Industrial Undertaking registered under the Indian Companies Act.

APPENDIX

MODEL FORM OF CERTIFICATE OF EXPERIENCE

(Name of Government owned Company/Corporation/Industrial Undertaking registered under the Indian Companies Act.)

(Registration Number with date of registration)

Issued to (here enter name and Address)

……………………………………………….

………………………………………………..

……………………………………………….

This is to certify that the above mentioned person has worked/has been working/is working in this institution as…………………………………………..(here enter the name of post holding or held or the nature of assignment held or holding in the institution) on Rs…………………………………..per day/per a period of ………………years…………..months……………….days from ………..to ……….. . He has got experience in plastic manufacturing for a period of ………..years………….months…………….days.

Dated signature, Name and Designation of the

ssuing Authority with Name of the Institution

Place

Date of issue

(Seal of Office)

Declaration

Signature with Date

Name of attesting Officer with

Designation and Name of Office.

(Office Seal)

Note: The veracity of the experience certificate will be subjected to scrutiny and those who issue or produce bogus certificate will be subjected to legal proceedings.

9. Application form:-

Application Form:

The application form is a single sheet of paper specially designed for processing through Optical Mark Reader (OMR) also. Candidates have to fill up both sides of the application.

Each application form contains a unique eight digit barcode on side A. This barcode number is unique for each application. The candidate has to quote this number for further enquiries.

The application forms will be available in the Post Offices inside the State and offices of the Kerala Public Service Commission.

The cost of application is Rs.10/- (Rupees Ten only). The cost of application for Scheduled Caste and Scheduled Tribe candidate is Rs.5/- (Rupees Five only). An inforamation brochure will be supplied along with the application form. Candidates should read the instructions carefully before filling up the forms. Candidates should not enclose any documents along with the application. Copies of documents to prove educational qualification, experience, community age etc should be submitted as and when called for by the Commission.

The applicant shall send his application in the envelope supplied with the application form. Applications should be submitted in the form devised and printed by the Kerala Public Service Commission, and applications otherwise submitted will be summarily rejected.

10.

Mode of sending the applications:-

(a)

The name of the post, the Category Number and the Department of the respective post should be clearly noted at the top of the envelope.

(b)

The name and address of the candidates shall be entered at the bottom left hand corner and the address to which applications are to be sent at the bottom right hand corner of the envelope.

11.

Last date for receipt of applications

17.01.2007 Wednesday upto 5.00 p.m

12.

Address to which applications are to be sent

The Under Secretary-IV

Government Wing (Recruitment)

Office of the Kerala Public Service Commission

Pattom, Thiruvananthapuram-695 004.

(Please also see the General Conditions given in Part II)